CAT 5e Shielded Cable: NETSET F/UTP 5e [1m], indoor

  • Description
  • Specifications


NETSET cables are compliant with Construction Products Regulation (CPR) and EN 50575 harmonized European standard that specifies reaction to fire performance requirements, test and assessment methods for electric cables used for the supply of electricity and for control and communication purposes, which are intended for use in construction works and subject to performance requirements on reaction to fire.

NETSET UTP PE 5e is a top quality twisted-pair cable designed for professional data transmission systems installed outdoors. Its polyethylene (PE) sheath is resistant to UV radiation (sunlight) and moisture. The cable put into ducts or trays can be used in installations buried in the ground. However, in the case of cabling operating in environments with increased humidity, the better choice is the gel-filled cable – NETSET UTPw 5e.
The latest high-performance IP CCTV cameras require appropriate quality of transmission medium. High resolutions of the cameras are connected with high bandwidth requirements (especially in the case of megapixel devices). A very important feature of a UTP cable becomes the crosstalk between pairs.
Due to market demand DIPOL has introduced a new family of high-quality twisted-pair cables named NETSET.
The outer diameter of the NETSET UTP PE 5e cable has been reduced to 6.0 mm, which considerably facilitates laying of the cable in ducts and pipes. The insulation of the wires has been made of special PE, to make it easier to crimp RJ-45 connectors onto the cable.

  • highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee,
  • parameters far exceeding the requirements for Category 5e twisted pair cables confirmed by the tests performed in Central Testing Laboratory of the National Institute of Telecommunications in Warsaw, Poland,
  • preliminary quality control of materials and thorough tests of the final product,
  • solid wires of 0.5 mm diameter (24 AWG),
  • wire insulation made of homogeneous, colored PE; outer diameter: 1.0 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
  • insulated wires twisted in pairs, protected with polyester foil,
  • shielding layer made of aluminum foil,
  • sheath made of gray PVC (RAL 7032), of 6.2 mm diameter,
  • meter markers – length error less than 0.5%.

NETSET UTP PE 5e  cable is manufactured in compliance with EN 50173, ISO/IEC 61156-5 edition: 2002, ISO/IEC 11801 standards.

NETSET cables come with a 15-year warranty.


The manufacturer guarantees stability of the parameters given in the “Specifications” at least for 15 years, on the condition that the cable is packed, transported, installed, and used according to adequate European standards (among others E-79100 and EN 50174-1), within the permissible environmental conditions (see the “Specifications” below).

NETSET UTP PE 5e  cable can be used in a wide temperature range: -20o…+50oC, and installed between -30o…+50 oC.

Code E1515_1
Wires solid copper conductors  Ø 0.511 mm (24 AWG)
Wire insulation/isolation PE/ polyester foil. aluminum foil
Sheath PVC (gray. RAL 7032)
Outer diameter [mm] 6.2
Copper content [kg/km] 14.2
Weight [kg/km] 39.2
Electrical parameters
Wave impedance [Ω] 100 ±15
Capacitance of any transmission path at 1kHz [nF/km] ≤56
Nominal Velocity of Propagation (NVP) [%] 67
Resistance of any transmission path [Ω/km] ≤ 188
Asymmetry in capacitance of transmission paths to the ground [pF/km] ≤ 1600
Insulation resistance [MΩ/km] > 5000
Installation and operation
Operating temperature range [°C] -20...+50
Operating humidity range [%] 0...100
Installation temperature range [°C] 0...+50
Minimum bending radius [radius to diameter ratio] >8